Door Hinge Adjustment Instructions

Door Hinge Adjustment Instructions

Door hinge adjustment instructions includes sealing pressure, horizontal and height adjustments.

Sealing Pressure Adjustment:
Changing the sealing pressure within the up stand dimension plus 1/64 in. (0.5 mm) reserve on both sides.



Horizontal Adjustment:




Height Adjustment:
Bearing bushes made of maintenance-free PVC containing Teflon — do not lubricate!





    • Related Articles

    • Tilt Turn Window to Turn Only Adjustment

      Document provides window restrictor specifications for changing tilt/turn window to turn only window. WINDOW RESTRICTOR CHANGING TILT/TURN WINDOW TO TURN ONLY WINDOW  1. Replace corner hardware from #2 to #1 (shown below). 2. Replace the top hinge ...
    • Window and Door Balance Block

      Specifications for windows and doors balance block and installation. Download PDF 
    • Sash Over-Shimming

      This document includes step-by-step instructions of sash over-shimming installation. At the end of the documents you will find PWS allowed dimensional deviations. SASH OVER-SHIMMING Step 1 Take out glazing beads that are shown in the picture: bottom ...
    • Squaring Up The Sash

      Document provides 7 steps of instruction on squaring up the sash. At the end of the document you will find PWS allowed dimensional deviations. SQUARING UP THE SASH Step 1 Take out glazing beads. Step 2 Remove IG unit. Step 3 Measure both diagonals. ...
    • QR Codes

      Starting in September 2020, every INTUS window and door will contain a QR code, to streamline the service experience. Just scan the code, submit a form and we will contact you!